|
UGotGlass Support Forum
Welcome to the UGotGlass Message Board. We get calls and emails every day asking us for advice on fusing, PMC, equipment etc.... so we decided to add this board as a way of consolidating this support. Hope you find it helpful. Please feel free to ask questions, make comments etc....NOTE: We do reserve the right to remove any post for any reason without notice to the poster. |
|
| Search For Similar Forums · Return to Website | ||
 First |
 Prev |
 Reply |
 Home |
Next  |
Last  |
| Viewing Page 1 of 1 (Total Posts: 2) |
| Author | Comment |
alane
 Mar 24, 08 - 4:38 PM |
glass is stuck to ceramic mold Help!
I must have not used enough mold release and my glass is stuck in my ceramic mold. I have the starfish mold which is about 4 inches square. What do I need to do the remove the glass from the mold or do I throw away both. (first time I used) Thanks! |
|
Nancy Tang
Mar 25th, 2008 - 9:05 AM |
Re: glass is stuck to ceramic mold Help!
I had this happen once when my daughter used frit mixed with liquid stringer to fill the mold.. the liquid seeped into the kiln wash too much I guess and got stuck when fired. I broke the mold and saved the piece... sad but necessary.... Nan |
| First |
Prev |
Reply |
Home |
Next |
Last |
bravenet.com